HIKARI UltraFocus 9007/HB5 LED Fog Light, 18000LM Dual Beam, 32W Prime ZES LED Equivalent to 120W Ordinary LED, High Performance Fog Light Bulbs, Halogen Upgrade Replacement, Canbus Ready, 6000K White

You can see the size of the OEM H7 vs the Hikari's. These are fairly large and fitting these into the housing is like pulling teeth. The good thing is that the H7 bulbs go straight in and lock using the single tab so somehow, managed to plug these in.Getting the accompanying error eliminators connected and pushed into the housing along with the OEM plug was very hard and we eventually did get everything in, into the tight space and were able to seal the headlightsThe bulbs automatically lock into a 3 and 9 O'clock position with the H7 connector but we did ensure it was the correct position by looking from the outside and further rotating theseThe lights are fairly bright but longevity due to heat is a real concern, particularly with everything packed in that tight space. Will watch it closely for the next few days and test further.Will update the review over time. If you are considering these, factor their size and the available space behind the headlights.

These look very nice on my 2023 Toyota Tacoma. I put three sets in the lowlights, high beams, and fog lights. Initial impressions:They are fairly easy to install. If you install them and they don’t work, unplug and rotate the connection 180 degrees. Polarity matters when installing these.They look 1000000% better than the stock halogens.The light pattern is very similar, as you can see in the photo. The top cut off line is almost identical.The only downside is that these puppies are loud. With the truck off, but the lights on, it sounds like the engine is still half running. Very loud. Now, you cannot hear them when driving or when the truck is on, but when it’s off they’re definitely noticeable from outside the truck.Also, in the short amount of time I ran them during install they did heat up pretty quickly (which is why they have loud fans). But I have a feeling if they run that hot all the time they will not last very long. But only time will tell.Overall I’m very happy with them! I’ll try to remember to report back on longevity.

Site could use more information, Easy install on 2010 CR V (except driver side rear clearance issue). Removable mounting bracket allowed installation using OEM headlight cap. More light than original, not as bright as HIDs on other vehicle. No issues with blinding other drivers. Very nice upgrade. Hope they last.

I like this product, it fits perfect for my car Mazda 3 2018 Sedan. The light is 1-2cm higher then the original but it is under the front driver side mirrors even after 20m. The light is straight or focused as they said in the product details. First picture is Before the seccond picture is After. The difference between old bulbs and this new ones is more then 200% improvement. I received the product after 2 weeks even they were initialy saying that will take around 1month. I am using this for the last 2 weeks, I hope they will last at least one year. Thank you Hikari, thank you Amazon.

I purchased another brand of LED lights on Amazon rated at 8,000 lumens for $35 but the H13 connector was poorly designed and required modification to fit into the plug. Once finally installed, the beam pattern wasn't very good and high beams were virtually worthless. I decided to pony up the money for a "name brand" set and settled on Hikari. I purchased their 18,000 lumen bulbs hoping to be blown away.In short, the perceived light output wasn't that much greater than the 8,000 lumen LED bulbs, however, the install was simple as the H13 connector clicked right in with no issues and the beam pattern was much better. High beams still leave a bit to be desired but low beams are bright and focused. High beams just seem to scatter light over too large an area, so the brightness drops considerably. Might be unique to my vehicle (Hummer H3) or lamp reflector design rather than an issue with the product itself, but disappointing nonetheless. Maybe a headlight realignment will improve their performance.UPDATE: Had my headlights aligned and that made a huge difference. High beams are very functional now, though still not as bright as I was hoping. Best headlights I've had, mind you, but not as big of an improvement over stock as I thought they'd be.

I just received these Hikari H11 LED bulbs for my 2018 Chev Colorado Z71 with Projector lights on the low beam. The Hikari uses the latest Phillips LUMILED chipsets. There are 6 chips per bulb, 3 on each side. I was told by other vendors not to use LED bulbs in projector housings but I could see no difference in beam pattern between the factory halogens and these new lights. I would say that my low beams now look like HID lights. Really nice white color and exceptionally bright. The beam pattern as you can see from the picture is very even with no bright or dark areas.I wanted to road test these to see if any oncoming cars would flash there lights at me but I had no issues with these lights and the road lit up with a nice bright white light.I am very impressed with these Hikari LED lights. The install took less than 20 minutes for both sides and the passenger side on the Colorado requires removal of a plastic shield before you can get access to the lights. The colorado also has dust covers and I had no problem installing the module, which is very compact into the dust cover. The Colorado also has DRL (Daytime Running Lights in Canada ) and these are working great with no issues with flicker or canbus errors. I just took the truck out for a good 30 min ride and checked the temperature of the housings and they seem to be running quite cool and the fan is nearly silent. Hopefully they will last longer than some of the more expensive halogens.Will probably upgrade the high beams and see how they perform.I will update this review as time goes on but I highly recommend these lights.

Considering the price, these are not that bright and have an uninspiring beam pattern with lots of glare above where the cutoff is supposed to be. They claim to have an excellent beam pattern and genuine Lumileds chips but don't perform as well in brightness and halogen filiment emulation as other H4 bulbs that cost half the price.

I bought three sets of these for my cars two 9600 lumens and one 12000 lumen set thats how good they are. First they are a direct fit and didnt not give my any codes. They are great quality and super bright you wont be disapointed I installed the 9600 for DRL on my Acura TL which is also the high beam i have no flickering and they are bright and i have never been flashed so far they are 100× better than my OEM halogens and i didnt even need to adjust them. I installed the other set of 9600 on my pontiac wave as the DRL, high beam, and low beam they work perfectly once aimed properly to avoid scattering light and blinding other drivers the lights went from not being able to tell if they are on with halogens, too me knowing they are on. I installedthe 12000 lumen bulbs in my fog lights for my TL and they are amazing the picture dont show how bright it really is. I went from using RCP to these and these are 100× better.

Bought these due to all the rave reviews. With a Ram, you have to remove shroud, remove the front grille, remove the entire light assembly, open light assembly, to get to the bulb. Not an easy process. The instructions DO NOT say anything about the extreme cat eye look these have when on. I was lucky I set the bulbs so the flat edge was the same on both sides, or I would have had to remove the light assembly again to turn one to match. As it is, one slightly turned on re-assembly so looks different than the other side. All this seller talks about is how focused these are, which is more a factor it's a projector. So if you look at the vehicle when lights on, there is a central vertical line of darkness like a cats eye. This could be sideways if you rotated the bulb, or 45 degrees.. ridiculous if it didn't match side to side. After the long process to swap these out, I took it for a drive. I would actually say these are no brighter than stock, if not actually dimmer. The difference is the light color temperature, but that is it. I was so disappointed my first thought was to send them back.. but then I'd have to tear the front of the truck apart again and waste another hour of my time. So I left them in. Every time I drive at night I curse the fact I ever spent money swapping stock out for these. SAVE YOUR MONEY IF YOU HAVE PROJECTORS.

I have a Honda st1100. So the picture I have included is the base of the light. Just to show that the bulb comes out of the base. It makes your life 💯% easier for replacing the bulb. I did also put the shim from railside performance ( a seller on Amazon) then you can slip the led into the base and adjust it so that you have the best pattern. I found the recommended 9-3 o'clock position to work best. The lights are so bright that it will light up street signs even when the sun hasn't gone down fully. At night I can see 3 times as far.(about the length of 5 houses). It gives you a nice bright centre on the road and a little dimmer on the sides, but still alot brighter then a Sylvania silver star ultra!I'm a known as elcheapo and I don't like to spend alot of money on things, but in this case the 118$ price tag was well worth it. I know there are cheaper LEDs out there, but I know that I've tried 2 in the below 50$ price range and also hids in that price range and nothing compares to these. The drivers don't get hot and the heat sink does not get too hot although I did opt on not putting the rubber cap back on to the back of my head lights, just in case.So to make a long story short. If you struggle to see at night and you just want something that works, buy these. You won't be unsatisfied!!!