TASAN RACING Universal Oil Catch Can with Oil Drain Cock Valve Baffled Reservoir Tank Air-Oil Separator, 3 Port, Aluminum, 150ml, Black

Have a 08 saturn outlook with the 3.6 vvt v6 they are known for higher oil film in the intake tube and behinde the butterfly valve.. Well mine was doing this and smoking pretty good on start up ... Yes I open up the vent holes on the pcv and othe vent made sure they would breath well that's when I decided to try this guy .. This plus about 8 dollars in rubber hose and some extra fittings and WOW no more smoke on start up no more oil in intake tube fuel milage went up DAM.. But must empty every oil change and if you live in a cold climate or extream cold temps leave the ball valve open a little on the bottom with a hose going to the underside of motor ... Reason why this also traps moisture and may freeze in line or in container and cause a build up of pressure in crank case and blow oil out of a weaker seal or someplace else... So simple leave drain open in winter or purchase a 0 -10 psi adjustable pop off valve and plumb that in the line just out side the pcv valve.. just some advise to help out with Possable problem...

Installed with great results in my 2012 Prius v.In general, I am fairly amazed at the quality of materials and fit, considering the very low price. Highly recommended.I used Teflon (R) tape for the fittings install, and everything seems good.One issue that even careful reading of the description, photos, Q+A, etc. still left me in doubt as to what I would actually receive: The answer is that yes, the 3/8 MNPT plug in the bottom of the can is included, shipping in place. So that's why it is not listed, or shown in the photos. If you install the shutoff valve to allow for easy draining, you would need to remove that plug, but it is an option.So if installing the valve, you can then (as I did) use the plug to close off one of the inlet holes, so you just run with a single inlet and single outlet. Just as I hoped.

The Product is great. the metal feels like a sturdy quality and the filter isn't cheap looking. The baffle works well to keep noise at a minimum and the 2 inlets are a nice touch. The only thing keeping me from giving a full 5 stars is the included drain valve. It's too small for the plug opening, and there is no indication of the correct size to order one from another place. Overall satisfied, though i wish the valve worked.

Cant beat the price. But the fittings are plastic. And they're for 1/2 ID tube. My PCV is 3/8 ID tubing. So I'll have to buy some fittings to make it work

This catch can works very well on my 2014 CTSV. My pic that’s attached shows how much oil it extracted in 200 miles of driving under little to no boost. Gave 4 stars because the mounting bracket is flimsy but overall I’m very happy with the product.

I ordered two. The Description specifies MPT 3/8 is not accurate its really 1/2 and the hose barb is 1/2. The drain ball valve is 3/8. Need to put it In a vise & Channel lock Pliers to unscrew the reservoir From the manifold

Gets the job done not much to say

Very well built catch can. Except the drain they send with it is smaller than the threads in the bottom of the can.